Rope and Polywire Hardware

Specific Hardware that will work best in finishing and adding functionality to your Rope / Polywire setup.
 
  • Switch to grid layout
  • Swtich to table layout
P-44-W or P-410
Wood post insulator for rope and wire with the screw molded into the thick polyethylene body.
ITEM # P-410-W or P-410-B
rope-corner-end-lag-pulley
High strength corner and end post insulator for Hot Rope, Braid, Wire, Poly-Coat, Hot-Coat, and polywire.
ITEM # R-65-C4 or R-65-BC4
polywire-corner-end-lag-pulley
For Polywire and smaller diameter Electric Ropes.
ITEM # R-70-C4
polywire-splicer-double-post-3mm
Splicing rolls of polywire
ITEM # R-46-C4
rope-splicer-double-post-6mm
Splicing ¼" electric rope
ITEM # R-47-C4
rope-splicer-single-post-1-4
For splicing rolls of electric rope.
ITEM # R-49-C4
P-RT_2015
A high strength plastic ratchet tensioner for use on polywire and polytape up to 1" wide. No need to cut material to tension it, just slide it in and turn for tension.
ITEM # P-RT
rope-to-rope-connector

Connects strands of ¼” rope or braid

ITEM # P-RR-1
screw-in-ring-insulator-drill-chuck

Makes it easy to install ring insulators. Fits any standard ⅜” drill.

ITEM # P-RDC-1